Reading & Notation
7 min read

How to Read Tin Whistle Tab

By OrkiUpdated

To read tin whistle tab, play the notes from left to right: each letter names a note (d, e, f#, g, a, b, c#) and the six circles above it show which holes to cover, filled for covered and empty for open, with the mouthpiece end at the top. A + after a letter, as in d+, means the same note an octave higher, # means sharp, and ^ means a half-covered hole. The letters give you the notes; your ear, or a recording of the tune, gives you the rhythm.

This guide explains each part of the notation exactly as it appears on TinWhistleTab's tab pages, with live diagrams, and the two places beginners most often go wrong: mixing up c and c#, and reading rhythm into a tab that doesn't contain it.

What Does a Tin Whistle Tab Show?

A tin whistle tab is the tune written as a row of notes, read left to right like a sentence. Each note on our tab pages has three parts, top to bottom: a column of six circles for the six holes, a small + if the note is in the high octave, and the note's letter.

The circles match the whistle as you hold it. The top circle is the hole nearest the mouthpiece, under the index finger of your top hand, and the bottom circle is the hole under the ring finger of your bottom hand. A filled circle means cover that hole, an empty circle means leave it open, and a circle filled on one side means cover half of it. You copy the picture onto your fingers; there is nothing to work out.

That is why tab is easier than sheet music for a beginner: it tells you what to do with your fingers rather than which pitch to find. After a few tunes you will barely look at the circles, because each letter always means the same shape and the letters alone become enough.

The whistletop = nearest your mouthupperhandlowerhandshownasThe chartone column = one noteGthe note it playscover the holeleave it open
Each tab note is a column of six circles, one per hole, with the mouthpiece end at the top. Filled means covered.

What Do the Letters Mean?

The letters are the notes of the D whistle's home scale, low to high: d, e, f#, g, a, b, c#. Low d is all six holes covered, and each letter after it lifts one more finger from the bottom, until c# has every hole open. If you can play the D scale, you can already play every letter in most tabs.

One letter catches everybody: c. A plain c, with no #, is C natural, a different note and a different fingering from c#. C# is all six holes open. C natural opens the top hole and covers the next two, with the bottom three open. It turns up in many Irish tunes and songs in G, so when a tab has both, check each c. The finger chart shows the two shapes side by side.

In the notation, letters inside a group run together: dgbgb is five notes, d, g, b, g, b, which is the opening of Amazing Grace on this site. On the tab page each letter gets its own diagram, and the groups are separated by a wider gap.

d e f# g a b c# d+
Covered hole
Open hole
Half-holed
+
Octave up (blow harder)
The D major scale in tab. The holes open one by one from the bottom as the notes rise.

What Does the + Mean in Tin Whistle Tab?

A + after a letter means the same note one octave higher: e+ is high E, and f#+ is high F sharp (the + always comes last, after any #). On the tab page the + sits between the circles and the letter, so you see it before you read the note.

For most notes the high version uses the same holes as the low one, and you only blow faster air. The diagram shows you where that is not true. High d+ has the top hole open: lift your top finger, fully or just a crack, and keep the other five down, which helps the note jump cleanly into the upper octave. High c has its own shape too (top hole open, second covered, third open, bottom three covered), while high c# stays all holes open, so for high notes copy the circles rather than assuming.

If a + note won't come out, or drops back to the low octave, you need a quicker, firmer stream of air, more like a brisk "too" than a harder push. If it squeals, ease off. The second octave guide has exercises for the jump.

d d+
Low d and high d+. The + means faster air, and for high D the top hole is also lifted, as the diagram shows.

What Do # and ^ Mean?

A # after a letter means sharp. You will see f# and c# in almost every tab because they belong to the D scale: they are ordinary notes with ordinary fingerings, not special techniques. The rarer sharps, g#, a# and d#, appear in tunes written for other instruments and use cross-fingerings or a half-hole; the diagram shows each one.

A ^ marks a half-holed note, where you cover only half of a hole. On our tabs you will meet it as e^, which is F natural: holes 1 to 4 covered, hole 5 half-covered, hole 6 open. The diagram draws a circle filled on one side, and the letter under it reads f. Slide or roll the finger back off the hole rather than lifting it, and tune the note by ear: cover more of the hole and it sinks toward E, uncover more and it rises toward F#.

Half-holed notes are the hardest thing in a beginner tab, so a tune full of them is probably not a beginner tune yet. Sharps and flats on the tin whistle goes deeper into half-holing and cross-fingering.

f# f
Covered hole
Open hole
Half-holed
+
Octave up (blow harder)
f# is a normal scale note; e^ is F natural, and the split circle shows the half-covered fifth hole.

How Do You Know the Rhythm From a Tab?

Letter tab tells you which notes to play, not how long each one lasts. Every letter is one note, so a repeated letter is a repeated note, not a long one: gggg in Hot Cross Buns is four separate Gs, each started with the tongue. Spaces split a line into phrases, which usually follow the bars or the breathing points of the tune, and longer tunes are divided into parts with small headings such as Part A and Part B.

So take the rhythm from your ear. Learn tunes you can already hum, and for anything new, listen to it first: play along with the backing track or video on the tab page where there is one. Where a tab offers Play along, the notes scroll past in time with the music while it listens through your microphone and scores every note, which teaches the rhythm as you go.

Some tabs on the site are made from ABC notation, and those do carry the rhythm: switch the tab page to Notes to see it on the staff. For a letter-only tab the Notes view shows the pitches without timing. When you are ready to read rhythm properly, how to read sheet music for tin whistle explains note lengths like the ones below.

Whole note4 beatsHalf note2 beatsQuarter note1 beatEighth note½ beat
Standard notation spells out timing with note shapes like these. Letter tab leaves it to your ear.

Quick Tips

  • •Read the + as "faster air", and check the circles for high d and c.
  • •c and c# are different notes: c# is all holes open, c is the top hole open with the next two covered.
  • •A repeated letter is a repeated note; tongue each one.
  • •Take the rhythm from a recording or a tune you know, not from the spacing.

Common Mistakes to Avoid

  • •Playing a plain c as c#, or the other way round.
  • •Assuming every + note uses the low fingering, when high d lifts the top finger.
  • •Holding a repeated letter as one long note instead of tonguing it again.
  • •Lifting the finger off a half-holed note instead of sliding it to cover half the hole.

Frequently Asked Questions

What do the symbols in tin whistle tab mean?

Letters name the notes: d, e, f#, g, a, b, c#, and c for C natural. A + after a letter means the octave above, played with faster air; # means sharp; and ^ means a half-covered hole, so e^ is F natural. In the diagrams a filled circle is a covered hole, an empty circle an open one, and a half-filled circle a half-covered one.

What is the difference between c and c# in tin whistle tab?

c# (C sharp) is all six holes open and belongs to the D scale. A plain c is C natural, played with the top hole open, holes 2 and 3 covered and the bottom three open. They are a semitone apart, and mixing them up is the most common tab-reading mistake.

How do I know the rhythm from tab?

Letter tab shows which notes, not how long they last. Learn tunes you already know by ear, or listen to a recording, backing track or video before you play. Tabs made from ABC notation do include the rhythm: switch the tab page to Notes to see it on the staff.

How to start playing tin whistle: get a D whistle, blow gently, cover all six holes for low D, lift a finger at a time for the scale, then learn a tune.

What notes does a tin whistle play? See the D whistle's scale, its two-octave range, why it is diatonic, and its home keys of D and G — with live diagrams.

A beginner's guide to reading sheet music for tin whistle: the treble clef and staff, note durations, the key signatures for D and G, and turning written pitches into fingerings.

Free printable

Put it into practice: 10 easy tunes, ready to print

The Starter Pack: a finger chart and 10 tunes in one PDF, ready to print. Then one new tab a week. Unsubscribe anytime.

You also join our weekly email: one new tab and a practice tip. Unsubscribe with one click. Privacy policy